Walpersdorfer Str. 38 91126 Schwabach Tel.: +49 (0)9122 - 63148-0 Fax.: +49 (0)9122 - 63148-29
Homepage-Sicherheit
Frequency converter SFU 400
our smallest converter so far The perfect solution for all CAD/CAM and dental applications Maximum performance at all operational ranges with outstanding high acceleration and deceleration capabilities and 28,5 kHz PWM For all temperature sensors: PTC, KTY and PT1000
Manual Power supply voltage Spindle: max. 48V / 7A DC                                                screw terminals 3,8mm² Continuous  output power Output voltage Continuous phase current Output frequency Spindle connection Spindle characteristics Control inputs                                             , 1 Digital:                , Start/Stop (0/24V) "0":0…7V,  "1":18…24V 1 Analog: set value rotational speed  (0…10V) Control outputs                                      , 2 Digital:                                       , free configuartion                                            open collector 45V/0,5A Spindel sensor  inputs Operating status  indicators Interface max. dimensions W x H x D (mm) Weight Chopper resistor Operating conditions TECHNICAL DATA max. 380VA / S1-100% 4-pol: U, V, W, PE                                                         screw terminals 3,8mm² PTC, KTY and PT1000 max. 16, stored internally max. 32V AC 7A AC: 2.000Hz / max. 120.000 rpm                                                           DC: 1.667Hz / max. 100.000 rpm Converter ready :  LED green                                                       Error   :  LED red RS232: 115.200Bd, 8Data  1 Stop Bit, no parity 100x 55 x 22 5 - 40°C /  rel. humidity of air max. 85% 47 Ω  / 10W ca. 0,3 kg Accessories
T 7A
Fuse
USB adapter:
back
Frequency converter SFU 400
Manual Power supply voltage Spindle: max. 48V / 7A DC                                                screw terminals 3,8mm² Continuous  output power Output voltage Continuous phase current Output frequency Spindle connection Spindle characteristics Control inputs                                             , 1 Digital:                , Start/Stop (0/24V) "0":0…7V,  "1":18…24V 1 Analog: set value rotational speed  (0…10V) Control outputs                                      , 2 Digital:                                       , free configuartion                                            open collector 45V/0,5A 1 Analog: PIN 6  /  AO  -  Analog  out:  output load (0…10V) Spindel sensor  inputs Operating status  indicators Interface max. dimensions W x H x D (mm) Weight Chopper resistor Operating conditions TECHNICAL DATA max. 380VA / S1-100% 4-pol: U, V, W, PE                                                         screw terminals 3,8mm² PTC, KTY and PT1000 max. 16, stored internally max. 32V AC 7A AC: 2.000Hz / max. 120.000 rpm                                                           DC: 1.667Hz / max. 100.000 rpm Converter ready :  LED green                                                       Error   :  LED red RS232: 115.200Bd, 8Data  1 Stop Bit, no parity 100x 55 x 22 5 - 40°C /  rel. humidity of air max. 85% 47 Ω  / 10W ca. 0,3 kg T 7A
Fuse